miércoles, enero 13, 2010

Ubuntu Studio y Xorg para R238W de Samsung

Acabo de instalar Ubuntu Studio en mi PC y finalizó sin problema, pero al iniciar no hubo manera de que arrancara ya que no pudo detectar mi monitor y se colgaba, se trata de un TV Samsung LCD de 23" (modelo R238W) para solventar eso arranqué mi máquina con el Live CD de Puppy 2.17 monté la partición donde se encuentra el Ubuntu Studio copie el archivo xorg.conf configurado por el Puppy que se encuentra en /etc/X11 y lo copie en la misma dirección del Ubuntu (por cierto, noté que el archivo xorg.conf no existía en la ruta de Ubuntu).

Después de esto reinicie, arranque el Ubuntu Studio y problema resuelto.

Copio la configuración del archivo xorg.conf por si les sirve de ayuda.



#Special base config file used in Puppy Linux.

# **********************************************************************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"

# This loads the DBE extension module.

Load "dbe" # Double buffer extension

# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection

# This loads the font modules
Load "type1"
Load "freetype"

# This loads the GLX module
Load "glx"

# This loads xtrap extension, used by xrandr
Load "xtrap"

EndSection

# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************

Section "Files"

# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.

RgbPath "/usr/X11R7/lib/X11/rgb"

# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)

FontPath "/usr/X11R7/lib/X11/fonts/misc/"
FontPath "/usr/X11R7/lib/X11/fonts/Type1/"
FontPath "/usr/X11R7/lib/X11/fonts/TTF/"

EndSection

# **********************************************************************
# Server flags section.
# **********************************************************************

Section "ServerFlags"

# Uncomment this to disable the VT switch sequence
# (where n is 1 through 12). This allows clients to receive these key
# events.

# Option "DontVTSwitch"

# Enables mode switching with xrandr
# There is a report that this can cause Xorg not to work on some
# video hardware, so default is commented-out...
# but i want to use it in xorgwizard so leave on...

Option "RandR" "on"

EndSection

#everything past here is auto-generated by Puppy's Xorg Wizard...


Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection

Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc102"
Option "XkbLayout" "latam" #xkeymap0
EndSection

Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "IMPS/2" #mouse0protocol
Option "Device" "/dev/mouse"
#Option "Emulate3Buttons"
#Option "Emulate3Timeout" "50"
Option "ZAxisMapping" "4 5" #scrollwheel
EndSection

Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
HorizSync 31.5-48.5
VertRefresh 40-70
#UseModes "Modes0" #monitor0usemodes
EndSection

Section "Modes"
Identifier "Modes0"
#modes0modeline0
EndSection

Section "Device"
### Available Driver options are:-
### Values: : integer, : float, : "True"/"False",
### : "String", : " Hz/kHz/MHz"
### [arg]: arg optional
#Option "ShadowFB" # []
#Option "DefaultRefresh" # []
#Option "ModeSetClearScreen" # []
Identifier "Card0"
Driver "vesa" #card0driver
VendorName "Intel Corporation"
BoardName "Unknown Board"
BusID "PCI:0:2:0"
EndSection

Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 16
Subsection "Display"
Depth 16
Modes "1024x768"
EndSubsection
EndSection

#PuppyHardwareProfile=Intel_r_Q33_Q35_G33_Graphics_Chip

No hay comentarios.:

Kill process in one console command line

example:   $ sleep 3600 & [ 1 ] 2225 $ sleep 3600 & [ 2 ] 2226 $ sleep 3600 & [ 3 ] 2227 $ sleep 3600 & ...